The store will not work correctly in the case when cookies are disabled.
23.12 - 05.01 OLEME SULETUD. Sellel ajavahemikul tehtud tellimusi töötleme alates 06.01.2025. HÄID PÜHI!
Lgp. kliendid!
Kõikidel vana e-poe kontode omanikel palume uue e-poe kasutamiseks lähtestada enda parool, et garanteerida ligipääs meie uude veebi!
Küsimuste korral palun võtke meiega ühendust telefonil +372 5042949 või saatke meile kiri aadressile info@moto24.ee
Finally exclusively at motogadget - the signal adapter for Triumph Twins (air cooled) and Triples with CAN bus. Until now, it was not possible to remove the original instruments on the Triumph two-cylinder from model 2011 - and the three-cylinder from model 2006. With the exception of the breakout box Triumph specially developed for the motoscope pro, there was no possibility to operate an instrument from motogadget.The CAN bus installed in these models immediately reacted with refusal to work if the original instrument was no longer plugged in. Thus, desired conversions were hardly possible at this point. The solution, especially for the Twins, is now exclusively available: the mo.tri from motogadget. Of course, the mo.tri provides not only information such as RPM and speed, but also the signals for indicator lights: Turn signal left/right, fuel reserve, error memory, high beam, neutral, H2O hot, oil pressure.Thereby some control lamps have a multiple function on instruments with 4 or 5 LEDs. Another big advantage is the almost foolproof installation! The original connector is used and at the terminals of the mo.tri are connected only on the basis of a color scheme the cables for instrument and indicator lights. No soldering or cable searching required. No intervention in the wiring harness. No loss of vehicle warranty. Fast Plug 'n Ride, it couldn't be easier. A great time saver and therefore worth cash.At the moment the above selectable models are available. More models will follow little by little. Please select your model and model year. The model year is not necessarily the same as the year of manufacture. The 11 digit of the chassis number indicates the model year. E.g. an 8 indicates model year 2008, an A indicates 2010, a B indicates 2011, a C indicates 2012, etc.
Scope of delivery
Instrument with approx. 55 cm connection cable
Connector suitable for the selected model
Cable end sleeves
2 x M3 screws
Cable holder
Cable tie
Specifications and features
Length/ Width/ Height 42 mm/ 42 mm/ 27 mm