This is Nolan’s top-of-the-range flip up helmet. It is characterised by its elegant design, its many technical features and the wide range of colours and graphics available. Its compact size (thanks to the availability of two outer shell sizes), double P/J homologation, an ultrawide visor, VPS sun screen (adjustable in various positions and fitted with the automatic retraction system), AirBooster Technology upper ventilation system, rotation of the chin-guard with elliptical motion, exclusive double-action chin-guard opening mechanism, double lever Microlock2 retention system with micrometric adjustment, innovative Clima Comfort inner comfort padding (with micro- perforated fabrics and adjustable neck-roll) and set up for the N-Com communication system are all reasons why the N100-5 is already very-much-appreciated by the most demanding of motorbike tourists. This status was also confirmed with the assigning of the title of “best purchase” by the German magazine Touren-Fahrer in 2018.
extra wide, made of Lexan, scratch-resistant coated
Sun Visor UV 400:
Dark gentian, made of Lexan, scratch-resistant coated
Microlock² closure for maximum safety
glasses channel Preparation
dual action chin-buckle with one-handed operation that minimizes the risk of accidental opening
chinrest lock for open driving (P/J double homologation)
elliptical chin-part mechanism that pulls the chin part closer to the shell when worn open
B901LR / B901 R / B601R / B1.4 / MCS III / ESS
P/J Homologation: The helmet is approved in P/J double configuration, as the removable protective chin guard (complete with air intake) has passed the homologation tests required by UN/ECE regulations for full-face helmets.
ULTRAWIDE VISOR: The large surface of the S/R (Scratch Resistant) visor makes it possible to have a broader view, also lateral, thus highly increasing active safety. It is also able to protect the rider’s face from water and wind while guaranteeing air circulation within the helmet, if used in “Jet” configuration.* LEXANTM* IS A TRADEMARK OF SABIC
PINLOCK® FOG-RESISTANT INNER VISOR: Thanks to the patented adjusting system, the stretch of the Pinlock® inner visor can be adjusted, acting from the exterior of the visor, without the necessity of removing. The Full Silicone Border (FSB), adopted under licence from Pinlock®, allows first of all for an increase in the size of the air chamber located between the helmet exterior and interior, thus further reducing the risk of fogging; secondly, it reduces the risk of scratches to the visor.
VPS SUNSCREEN: Moulded out of LEXAN, it is S/R (Scratch Resistant) and F/R (Fog Resistant) treated and offers UV protection up to 400 nanometres. It can be easily removed for maintenance and cleaning and is fully-adjustable.
VENTILATION SYSTEM +AIRBOOSTER TECHNOLOGY: The exclusive “AirBooster Technology” upper system ensures optimal ventilation where the rider’s head most requires: the air is extracted from the upper air intake and forced into the most critical areas, avoiding any dispersion, to guarantee maximum comfort also in extreme riding conditions.
CHIN GUARD ROTATION WITH ELLIPTICAL TRAJECTORY (patented): The chin guard rotation movement with elliptical trajectory makes it possible to keep the total size of the helmet’s front section to a minimum, when the chin guard is open. The “seal” effect is consequently highly reduced and riding comfort is still guaranteed, even when the chin guard is lifted.
DUAL ACTION (patented): Exclusive (patented) DUAL ACTION chin guard opening system. Positioned in the centre of the chin guard, it allows for easy, one-handed opening. The dual action opening mechanism reduces the risk of accidental opening: the chin guard can be opened only operating the first release lever (or safety lock) and then activating the second lever.
MICROLOCK2 (patented): Double lever retention system with micrometric adjustment. This system consists of a thermoplastic ergonomic opening lever, and of a second aluminium toothed and holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system.
SINGLE-BLOCK CHEEK PADS: The internal padding in expanded foam for the cheek pads has been designed in order to provide superior even pressure and consistent performance over time compared to traditional padding. It can also be removed from its fabric coverings in order to make washing of the latter easier.
CLIMA COMFORT INNER COMFORT PADDING: A new concept, the inner padding is made with double density micro perforated fabric. Combined with the 'AirBooster Technology' upper ventilation system, it distributes air in the upper part of the rider's head. The shape of the wind shield aids the closing of the chinguard and protects from irritating drafts of air in the chin area.
NECK-ROLL: Removable, washable and adjustable, consequently easily adaptable to the form of the rider and the various set-ups resulting from differing riding positions.
MOULDED LINING FOR THE INNER CHEEK PADS IN POLYSTYRENE: The helmet has an innovative moulded lining for the internal cheek pads in polystyrene which allows for a more precise fitting of the fabric inner cheek pads. This lining, which gives the product a quality finish, also provides the housing for the earphones of the N-Com communication system.
READY FOR N-COM: The helmet is set up and approved with installed N-Com communication system and with the innovative ESS (Emergency Stop Signal).
N-COM COMPATIBILITY: B901L R series - B601 R series - ESS - MCS III R series
1 Nolan N100-5 Classic N-Com Helmet
1 Pinlock Visor (FSB 4L)