Denali 2.0 Plug-n-Play CANsmart™ Controller GEN II V-Twin - Harley-Davidson Street Glide, Road Glide, Sportster, Dyna, Softail, Touring, CVO & Trike

Description

The ground-breaking Harley-Davidson CANbus controller provides plug & play connection and intelligent control of aftermarket and genuine Harley-Davidson accessories right from your bike's original switches or DENALI Accessory Manager Software. Simply connect the CANsmart™ Controller to your Harley-Davidson diagnostic port to access over 35 programmable accessory settings that provide intelligent control of factory passing lamps, auxiliary lights, horns, brake lights, or any other accessory you can imagine. The four accessory circuits are electronically fused and can provide up to 25 peak amps (10 amps continuous).

The CANsmart H-D is compatible with over 60 Harley-Davidson models including all Sportster, Dyna, Softail, Touring, CVO, and Trike models from 2014 to present.

Features

• - High/Low Sync: Set passing lamps and auxiliary lights to switch between a programmable high/low setting with the factory high beam switch.
• - On/OFF and Dim: Independently control two sets of lights on/off and intensity level (for both day and night) right from your bike's factory trip switch. Click three times to turn lights on/off or hold for 3 seconds to enter dimming mode where you can cycle between 10%-100% intensity.
• - Modulate Lights: Set passing lamps or auxiliary lights to modulate to increase your visibility to other motorists.
• - Flash to Pass: Pulse your high beam switch three times and your auxiliary lights will strobe three times fast.
• - Cancel With Turn Signal: Cancels the corresponding auxiliary light when you turn your turn signal on, preventing powerful auxiliary lights from overpowering your signal.
• - Plug & Play Horn Installation: Quickly and easily connect high-power aftermarket horns like the SoundBomb™ without additional harness or relay.
• - Strobe with Horn: Automatically strobes your passing lamps or auxiliary lights when you sound your horn.
• - Deceleration Activated “Smart Brake” Technology: Reads vehicle speed in real-time to activate your brake light during deceleration before you touch the brake. Sensitivity and minimum speed are adjustable.
• - Flash Pattern Braking: Provides four different flash patterns to make auxiliary brake lights more noticeable. Set them to flash under hard braking, flash continuously, or flash rapidly before holding steady (California legal flash rate).
• - Compatible with Genuine Harley-Davidson Accessories: Offers smart brake and flash pattern braking for Harley-Davidson aftermarket LED brake lights.
• - Switched Power Source: Provides clean switched 12V power, perfect for GPS, phone, heated gear, or other devices.
• - Delay Time Out: Keeps accessories powered for up to 30 seconds after turning off the bike.

What’s In The Box?

• - (1) CANsmart™ Controller
• - (2) 5.5ft Light Extension Cables
• - (2) OEM Passing Lamp Wiring Adapters
• - 5ft SoundBomb Horn Extension Cable
• - B6 Brake Light Wiring Adapter
• - Zip-ties
• - Adhesive Hook-and-Loop Fastener
• - Micro USB Programming Cable

CANsmart Software

Click here to download the newest software! (v2112.2 – Mac and PC versions available. Released 01/21/2022)

Note: When choosing DENALI 2.0 LED Auxiliary Lights for use with the CANsmart system, order only the light pods. The cabling and relay set included in the full kits are not necessary. DENALI pods include D4, D2, DM, DR1, D7, and S4 (sold individually, so order two per lighting style).

Fitment Notes

• - 2014-2019 Harley-Davidson Sportster models (all)
• - 2014-2019 Harley-Davidson Dyna Glide models (all)
• - 2014-2019 Harley-Davidson Softail models (all)
• - 2014-2019 Harley-Davidson Touring models (all)
• - 2014-2019 Harley-Davidson CVO models (all)
• - 2014-2019 Harley-Davidson Trike models (all)